Wednesday, 31 January 2018

Machinery Moving in Sheffield and Rotherham



Hire Machinery Moving Equipment in Sheffield, Rotherham, and other areas in South Yorkshire. 


If you have a machinery moving project, relocation projection, or machinery transportation job scheduled in Rotherham, Sheffield, or a different location in Sheffield, you can obtain quality and safe machinery moving equipment to hire at MF Hire (Sheffield). 

Available ex-stock is a comprehensive choice of equipment and tools to assist you with machine moving Sheffield including lifting jacks, a frame gantries, tracked and steerable moving skates, pallet trucks, the hydraulic lifting skoots system, and a large range of SL10, SL15, and SL25 Genie Lifts. 

Machine moving and relocation doesn't have to be difficult, but having the right equipment to hand can make all the difference, and this is where MF Hire in Sheffield can help you. 

Lifting and moving any item of equipment should be done in the best as well as the safest way and after a risk assessment and method statement has been drawn-up, the right equipment and tools for the individual job should be sourced whether they are hired, or purchased outright. 

Moving Skates


In nearly all cases where one or more items of machinery needs to be moved, relocated, or transported, a set or two of moving skates is required, along with maybe several hydraulic jacks, a number of hydraulic lifting cylinders, and the necessary hydraulic pumps. 

All of these can be supplied to your factory or workshop that is in Sheffield or one of the other local areas including Barnsley, Chesterfield, Dinnington, Doncaster, Dronfield, Rotherham, and elsewhere within 40 miles of MF Hire's equipment hire and sales outlet in central Sheffield. 

Looking for a supplier of lifting equipment to hire in Doncaster? MF Hire has regular deliveries and a collection service for lifting equipment to all postcode areas and industrial estates in Doncaster as well as nearby Bolton on Dearne, Rotherham, Manvers, and Wath Upon Dearne. 


Contact Details


For more details and to obtain the temporary rental of machinery moving equipment in Sheffield (or within 40 miles of central Sheffield) please contact: 

MF Hire
38 East Bank Road
Sheffield
South Yorkshire
S23PS

Telephone: 0114 2750431

www.sheffieldtoolhire.co.uk 


Monday, 25 September 2017

Mag Drill Cutters in Sheffield

.

Mag Drill Cutter Stockist in Sheffield


Annular Cutters, Rotabroach Cutters, Drill Bits, Mag Drill Bits


Save money on buying annular mag drill cutters in Sheffield. Also referred to as mag drill or Rotabroach bits these accessories are used in portable magnetic drilling machines for the job of drilling steel and other metals on-site. 

Engineers, steel erectors, automotive mechanics, mechanical fitters, and other personnel that work within the steel erection and steel fabrication industries regularly use mag drills and so have a constant need to buy new annular cutters due to them wearing out through natural wear and tear in the workplace.


To Buy Contact MF Hire in Sheffield - Tel: 0114 2750431

These cutters can be collected in person from MF Hire's sales outlet based at East Bank Road, Sheffield S23PS, or alternatively they can be delivered direct to your business or local site address.

In the City of Sheffield this includes the popular industrial areas of Attercliffe, Brightside, Darnall, Hillsborough, Holbrook, Killamarsh, Meadowhall, Neepsend, Roman Ridge, and the Wicker.

Regular deliveries are also undertaken to Barnsley, Chesterfield (including the Sheepbridge Industrial Estate), Dinnington, Doncaster, Dronfield, Rotherham, Wath Upon Dearne, and many other locations. 


Rotabroach Mag Drill Cutter Sheffield


Buy Cheap Mag Drill Cutters


A large number of users and purchasers regularly search online using Google for the search phrase of "cheap mag drill cutters" and "cheapest price Rotabroach cutters" - using these search keywords can bring-up a wide variety of different webpages and websites, all stating or claiming to offer UK buyers cheap prices on mag drill cutters.

Whilst the idea of buying cheap priced cutters and bits can sound very attractive, especially if budgets are tight in your steel fabrication workshop or engineering shop, it is not always the best policy to buy the cheapest cutters that you can find! This is because in most cases you will end up purchasing annular mag drill cutters that are manufactured to the cheapest of specifications and which wear-out at a faster rate than a known branded one.

Most cheap mag drill cutters will carry a brand name that is usually unheard of, or will carry no brand name on them at all, unlike reputable ones that can be supplied in the UK from the likes of Alfra UK, G&J Hall (their Powerbor range), Rotabroach, and Unibor. 

Buy Branded Mag Drill Cutters - But at a Low Price!


Instead of choosing to buy the cheapest mag drill cutters that you can find locally in Sheffield, or maybe online from Amazon or from one of the many equipment and tool sellers on ebay uk - why not buy well known brands of quality mag drill cutters at a low price from this mag drill cutter supplier in Sheffield?

Contact MF Hire: Telephone (0114) 2750431 

38 East Bank Road, Sheffield S23PS

You can buy drilling bits, pilot pins, and annular cutters from brands that include Alfra, Powerbor, Rotabroach, and Unibor, at discounted prices that are really competitive and at amongst the best prices that you will find in Sheffield as well as in nearby Bakewell, Buxton, Chesterfield, Dinnington, Doncaster, Dronfield, Hathersage, Mansfield, Rotherham, and Worksop. 

When you buy an annular cutter that carries the brand name of Alfra, Powerbor, Rotabroach, or Unibor you can be assured that the cutter is of the a good quality and which will provide a strong cutting performance as well as service life. These four (4) makes of cutters are well known in the steel fabrication industry as being brand leaders, just like Starrett UK are when it comes to bandsaw blades and metal cutting holesaws.


Powerbor (G&J Hall) Mag Drill Cutters


G&J Hall have been manufacturing engineering and metal working tools for a great number of years, and it is no surprise that they are renowned for their high quality range of cutters that are used in portable electromagnetic drilling machines.

Within their range are standard HSS M2 Metric and Imperial sized cutters, Premium M42 Cobalt cutters in Metric and Imperial sizes, Tungsten Carbide metric cutters, and their Blue Coated annular cutters.

The complete range can be purchased from MF Hire in Sheffield catering for the industrial user in Sheffield as well as nearby Bakewell, Barnsley, Buxton, Chesterfield, Dinnington, Dronfield, Hope, Rotherham, Staveley, Stoney Middleton, Wath Upon Dearne, and Worksop.


Powerbor Annular Cutters - Standard M2 HSS (25mm Length)

Part No              Item No           Size

20AAM12         40002             12mm x 25mm Depth of Cut
20AAM13         40004             13mm x 25mm
20AAM14         40006             14mm x 25mm
20AAM15         40008             15mm x 25mm
20AAM16         40010             16mm x 25mm
20AAM17         40012             17mm x 25mm
20AAM18         40014             18mm x 25mm
20AAM19         40016             19mm x 25mm
20AAM20         40018             20mm x 25mm
20AAM21         40020             21mm x 25mm
20AAM22         40022             22mm x 25mm
20AAM23         40024             23mm x 25mm
20AAM24         40026             24mm x 25mm
20AAM25         40028             25mm x 25mm
20AAM26         40030             26mm x 25mm
20AAM27         40032             27mm x 25mm
20AAM28         40034             28mm x 25mm
20AAM29         40036             29mm x 25mm
20AAM30         40038             30mm x 25mm
20AAM31         40040             31mm x 25mm
20AAM32         40042             32mm x 25mm
20AAM33         40044             33mm x 25mm
20AAM34         40046             34mm x 25mm
20AAM35         40048             35mm x 25mm
20AAM36         40050             36mm x 25mm
20AAM37         40052             37mm x 25mm
20AAM38         40054             38mm x 25mm
20AAM39         40056             39mm x 25mm
20AAM40         40058             40mm x 25mm
20AAM41         40060             41mm x 25mm
20AAM42         40062             42mm x 25mm
20AAM43         40064             43mm x 25mm
20AAM44         40066             44mm x 25mm
20AAM45         40068             45mm x 25mm
20AAM46         40070             46mm x 25mm
20AAM47         40072             47mm x 25mm
20AAM48         40074             48mm x 25mm
20AAM49         40076             49mm x 25mm
20AAM50         40078             50mm x 25mm
20AAM51         40080             51mm x 25mm
20AAM52         40082             52mm x 25mm
20AAM53         40084             53mm x 25mm
20AAM54         40086             54mm x 25mm
20AAM55         40088             55mm x 25mm
20AAM56         40090             56mm x 25mm
20AAM57         40092             57mm x 25mm
20AAM58         40094             58mm x 25mm
20AAM60         40096             60mm x 25mm
20AAM61         40000             61mm x 25mm
20AAM62         40102             62mm x 25mm
20AAM63         40104             63mm x 25mm
20AAM64         40106             64mm x 25mm
20AAM65         40108             65mm x 25mm 

                                         

  

Rotabroach Mag Drill Cutters


The brand name of Rotabroach is one that is famous and really well known when it comes to describing annular cutters as well as electric powered broaching machines. Their range of cutters is one that is highly recognised in a large cross-selection of metal working industries including those that carry out work around steel erection, steel fabrication, mechanical fitting, engineering maintenance, and of course welding.

At the time of writing the Rotabroach company has five (5) category types of mag drill cutters that you can buy. These are (1) Rotabroach Raptor M2Al cutters - these have a unique cutting geometry that you will only find on the M2Al broach cutters. This feature has being designed and incorporated so that they not only last longer, but so that they also cut faster with a better finished hole than any other annular cutter. Rotabroach Raptor cutters are designed for the boring of holes in mild steel, structural steel, aluminium, brass, and also copper.

(2) Rotabroach Raptor TCT annular cutters - These tungsten carbide cutters (TCT) are manufactured with the inclusion of super micro-grain carbide tips, providing a long tool life even when being used on the toughest of metals. The tips are made up of a composition of 50% carbide along with 50% tungsten. The Raptor TCT range of cutters are harder and hence are able to withstand higher drilling and working temperatures hence resulting in less wear when being put to use in your fabrication shop.

Another feature of this leading manufacturers TCT cutter range is the inclusion of their in-built 3 step geometry that gives an even tooth loading for a smooth and vibration free cut. This model line-up is aimed at users that need to drill holes in construction grade steel, stainless steel, cast iron, high strength steel and fine grain steel. 

(3) Rotabroach Raptor CTCT - These are designed and manufactured to enable them to cut through the hardest of materials. The Raptor CTCT range of magnetic drilling machine cutters are manufactured from high quality tool steel with precision ground Cermet Tungsten Carbide Tips. The annular cutters also have a 3 step alternative tooth geometry to reduce heat build-up whilst cutting. This range of cutters is designed for users that have a need for drilling holes in cast iron, hardox, inox, inconel, fine grade steel and other tough types of alloy.

(4) Rotabroach M2Al Rail Cutters - These are designed for usage on rail tracks. This line-up of bits are manufactured from high quality, high grade steel that is heat treated, providing a greater hardness of cutter.

Aimed at the UK rail industry this range of annular cutters can be ran at lower speeds when drilling holes than compared with some other broaching cutters.

The tooth geometry on this range is also designed specifically for the drilling of rail tracks.

The 5th and last type (5) of Rotabroach Cutter is their range of TCT Rail Cutters, these have been designed and manufactured specifically for cutting holes into railway track.

As you would probably expect from a product that carries the famous Rotabroach brand name, these tct cutters are supplied not just in Sheffield and Yorkshire, but all over the World in order to drill the hardest and toughest rail track. Rotabroach TCT Rail Cutters have a body that incorporates a special design, this gives maximum stability and support when being put to use. As with all annular mag drill cutters it is always recommended that a pilot pin is used.

Buying Rotabroach Cutters in Sheffield


It is really easy to buy one or more of these mag drill cutters in the City of Sheffield in South Yorkshire, the same goes for release guide pins, cutting oil, and any genuine branded accessory that is in the Rotabroach range. 


The complete range of annular mag drill cutters can be purchased in Sheffield at: 


MF Hire: Telephone (0114) 2750431 

38 East Bank Road, Sheffield S2 3PS


Rotabroach Raptor HSS M2 Mag Drill Cutters

Standard Length Rotabroach Annular Cutter
 
Rap110     11mm x 25mm Depth of Cut
Rap120     12mm x 25mm Depth of Cut
Rap130     13mm x 25mm Depth of Cut
Rap140     14mm x 25mm Depth of Cut
Rap150     15mm x 25mm Depth of Cut
Rap160     16mm x 25mm Depth of Cut
Rap170     17mm x 25mm Depth of Cut
Rap180     18mm x 25mm Depth of Cut
Rap190     19mm x 25mm Depth of Cut
Rap200     20mm x 25mm Depth of Cut
Rap210     21mm x 25mm Depth of Cut
Rap220     22mm x 25mm Depth of Cut
Rap230     23mm x 25mm Depth of Cut
Rap240     24mm x 25mm Depth of Cut
Rap250     25mm x 25mm Depth of Cut
Rap260     26mm x 25mm Depth of Cut
Rap270     27mm x 25mm Depth of Cut
Rap280     28mm x 25mm Depth of Cut
Rap290     29mm x 25mm Depth of Cut
Rap300     30mm x 25mm Depth of Cut
Rap310     31mm x 25mm Depth of Cut
Rap320     32mm x 25mm Depth of Cut
Rap330     33mm x 25mm Depth of Cut
Rap340     34mm x 25mm Depth of Cut
Rap350     35mm x 25mm Depth of Cut
Rap360     36mm x 25mm Depth of Cut
Rap370     37mm x 25mm Depth of Cut
Rap380     38mm x 25mm Depth of Cut
Rap390     39mm x 25mm Depth of Cut
Rap400     40mm x 25mm Depth of Cut
Rap410     41mm x 25mm Depth of Cut
Rap420     42mm x 25mm Depth of Cut
Rap430     43mm x 25mm Depth of Cut
Rap440     44mm x 25mm Depth of Cut
Rap450     45mm x 25mm Depth of Cut
Rap460     46mm x 25mm Depth of Cut
Rap470     47mm x 25mm Depth of Cut
Rap480     48mm x 25mm Depth of Cut
Rap490     49mm x 25mm Depth of Cut
Rap500     50mm x 25mm Depth of Cut
Rap510     51mm x 25mm Depth of Cut
Rap520     52mm x 25mm Depth of Cut

Long Series Rotabroach Annular Cutter

Rapl120    12mm x 50mm Depth of Cut
Rapl130    13mm x 50mm Depth of Cut
Rapl140    14mm x 50mm Depth of Cut
Rapl150    15mm x 50mm Depth of Cut
Rapl160    16mm x 50mm Depth of Cut
Rapl170    17mm x 50mm Depth of Cut
Rapl180    18mm x 50mm Depth of Cut
Rapl190    19mm x 50mm Depth of Cut
Rapl200    20mm x 50mm Depth of Cut
Rapl210    21mm x 50mm Depth of Cut
Rapl220    22mm x 50mm Depth of Cut
Rapl230    23mm x 50mm Depth of Cut
Rapl240    24mm x 50mm Depth of Cut
Rapl250    25mm x 50mm Depth of Cut
Rapl260    26mm x 50mm Depth of Cut
Rapl270    27mm x 50mm Depth of Cut
Rapl280    28mm x 50mm Depth of Cut
Rapl290    29mm x 50mm Depth of Cut
Rapl300    30mm x 50mm Depth of Cut
Rapl310    31mm x 50mm Depth of Cut
Rapl320    32mm x 50mm Depth of Cut
Rapl330    33mm x 50mm Depth of Cut
Rapl340    34mm x 50mm Depth of Cut
Rapl350    35mm x 50mm Depth of Cut
Rapl360    36mm x 50mm Depth of Cut
Rapl370    37mm x 50mm Depth of Cut
Rapl380    38mm x 50mm Depth of Cut
Rapl390    39mm x 50mm Depth of Cut
Rapl400    40mm x 50mm Depth of Cut
Rapl410    41mm x 50mm Depth of Cut
Rapl420    42mm x 50mm Depth of Cut
Rapl430    43mm x 50mm Depth of Cut
Rapl440    44mm x 50mm Depth of Cut
Rapl450    45mm x 50mm Depth of Cut
Rapl460    46mm x 50mm Depth of Cut
Rapl470    47mm x 50mm Depth of Cut
Rapl480    48mm x 50mm Depth of Cut
Rapl490    49mm x 50mm Depth of Cut
Rapl500    50mm x 50mm Depth of Cut
Rapl510    51mm x 50mm Depth of Cut
Rapl520    52mm x 50mm Depth of Cut
Rapl530    53mm x 50mm Depth of Cut
Rapl540    54mm x 50mm Depth of Cut
Rapl550    55mm x 50mm Depth of Cut
Rapl560    56mm x 50mm Depth of Cut
Rapl570    57mm x 50mm Depth of Cut
Rapl580    58mm x 50mm Depth of Cut
Rapl590    59mm x 50mm Depth of Cut
Rapl600    60mm x 50mm Depth of Cut
Rapl610    61mm x 50mm Depth of Cut
Rapl620    62mm x 50mm Depth of Cut 
Rapl630    63mm x 50mm Depth of Cut
Rapl640    64mm x 50mm Depth of Cut

Mag Drill Cutter Sheffield
Rotabroach Annular Cutter Sheffield
  

Unibor Mag Drill Cutters


These are manufactured in the UK by Universal Drilling and Cutting Equipment Ltd that is based in Sheffield in South Yorkshire. Available to buy from MF Hire (Sheffield) as well as in Leeds, Unibor mag drill cutters represent great value for money as well as offering high quality cutters that are aimed at the professional user.

The range of Unibor Annular Cutters are available in two (2) useful length sizes, these being 30mm and the long series range at 50mm.

Unibor mag cutters can be used in all of the magnetic drilling machines that are in their broaching range including their Unibor H32, the EQ35N, EQ50, EQ100, A100, E100 plus, and E100FRplus.

They can also be used with all other brand of mag drills including those carrying brand names of Alfra, Evolution, Dewalt, Evolution, Fein, Hitachi, Hole-Maker Technology, Powerbor, and Rotabroach.

Looking to buy one or more Unibor cutters? You can choose from their M2 HSS steel cutters or their M42 Cobalt cutters. Cobalt cutters are stronger cutters than HSS ones and hence are more suitable for the drilling of harder steels and metals.

Buying Unibor Annular Cutters in Sheffield


The complete range of Unibor brand of annular mag drill cutters can be purchased in Sheffield at: 


MF Hire: Telephone (0114) 2750431 

38 East Bank Road, Sheffield S2 3PS


Unibor M2 HSS Mag Drill Cutter Range

 

Standard Length Annular Cutter (30mm length, also referred to as "short series")

12S    12mm x 30mm Depth of Cut
13S    13mm x 30mm Depth of Cut
14S    14mm x 30mm Depth of Cut
15S    15mm x 30mm Depth of Cut
16S    16mm x 30mm Depth of Cut
17S    17mm x 30mm Depth of Cut
18S    18mm x 30mm Depth of Cut
19S    19mm x 30mm Depth of Cut
20S    20mm x 30mm Depth of Cut
21S    21mm x 30mm Depth of Cut
22S    22mm x 30mm Depth of Cut
23S    23mm x 30mm Depth of Cut
24S    24mm x 30mm Depth of Cut
25S    25mm x 30mm Depth of Cut
26S    26mm x 30mm Depth of Cut
27S    27mm x 30mm Depth of Cut
28S    28mm x 30mm Depth of Cut
29S    29mm x 30mm Depth of Cut
30S    30mm x 30mm Depth of Cut
31S    31mm x 30mm Depth of Cut
32S    32mm x 30mm Depth of Cut
33S    33mm x 30mm Depth of Cut
34S    34mm x 30mm Depth of Cut
35S    35mm x 30mm Depth of Cut
36S    36mm x 30mm Depth of Cut
37S    37mm x 30mm Depth of Cut
38S    38mm x 30mm Depth of Cut
39S    39mm x 30mm Depth of Cut
40S    40mm x 30mm Depth of Cut
41S    41mm x 30mm Depth of Cut
42S    42mm x 30mm Depth of Cut
43S    43mm x 30mm Depth of Cut
44S    44mm x 30mm Depth of Cut
45S    45mm x 30mm Depth of Cut
46S    46mm x 30mm Depth of Cut
47S    47mm x 30mm Depth of Cut
48S    48mm x 30mm Depth of Cut
49S    49mm x 30mm Depth of Cut
50S    50mm x 30mm Depth of Cut
51S    51mm x 30mm Depth of Cut
52S    52mm x 30mm Depth of Cut
53S    53mm x 30mm Depth of Cut
54S    54mm x 30mm Depth of Cut
55S    55mm x 30mm Depth of Cut
56S    56mm x 30mm Depth of Cut
57S    57mm x 30mm Depth of Cut
58S    58mm x 30mm Depth of Cut
59S    59mm x 30mm Depth of Cut
60S    60mm x 30mm Depth of Cut

Unibor Long Length Annular Cutter (50mm length, also referred to as "long series")

12L    12mm x 50mm Depth of Cut
13L    13mm x 50mm Depth of Cut
14L    14mm x 50mm Depth of Cut
15L    15mm x 50mm Depth of Cut
16L    16mm x 50mm Depth of Cut
17L    17mm x 50mm Depth of Cut
18L    18mm x 50mm Depth of Cut
19L    19mm x 50mm Depth of Cut
20L    20mm x 50mm Depth of Cut
21L    21mm x 50mm Depth of Cut
22L    22mm x 50mm Depth of Cut
23L    23mm x 50mm Depth of Cut
24L    24mm x 50mm Depth of Cut
25L    25mm x 50mm Depth of Cut
26L    26mm x 50mm Depth of Cut
27L    27mm x 50mm Depth of Cut
28L    28mm x 50mm Depth of Cut
29L    29mm x 50mm Depth of Cut
30L    30mm x 50mm Depth of Cut
31L    31mm x 50mm Depth of Cut
32L    32mm x 50mm Depth of Cut
33L    33mm x 50mm Depth of Cut
34L    34mm x 50mm Depth of Cut
35L    35mm x 50mm Depth of Cut
36L    36mm x 50mm Depth of Cut
37L    37mm x 50mm Depth of Cut
38L    38mm x 50mm Depth of Cut
39L    39mm x 50mm Depth of Cut
40L    40mm x 50mm Depth of Cut
41L    41mm x 50mm Depth of Cut
42L    42mm x 50mm Depth of Cut
43L    43mm x 50mm Depth of Cut
44L    44mm x 50mm Depth of Cut
45L    45mm x 50mm Depth of Cut
46L    46mm x 50mm Depth of Cut
47L    47mm x 50mm Depth of Cut
48L    48mm x 50mm Depth of Cut
49L    49mm x 50mm Depth of Cut
50L    50mm x 50mm Depth of Cut
51L    51mm x 50mm Depth of Cut
52L    52mm x 50mm Depth of Cut
53L    53mm x 50mm Depth of Cut
54L    54mm x 50mm Depth of Cut
55L    55mm x 50mm Depth of Cut
56L    56mm x 50mm Depth of Cut
57L    57mm x 50mm Depth of Cut
58L    58mm x 50mm Depth of Cut
59L    59mm x 50mm Depth of Cut
60L    60mm x 50mm Depth of Cut


Unibor Cobalt M42 Series Cutters 


Standard Length Annular Cobalt Cutter (30mm length, also referred to as "short series")

M12S    12mm x 30mm Depth of Cut
M13S    13mm x 30mm Depth of Cut 
M14S    14mm x 30mm Depth of Cut
M15S    15mm x 30mm Depth of Cut
M16S    16mm x 30mm Depth of Cut
M17S    17mm x 30mm Depth of Cut
M18S    18mm x 30mm Depth of Cut
M19S    19mm x 30mm Depth of Cut
M20S    20mm x 30mm Depth of Cut
M21S    21mm x 30mm Depth of Cut
M22S    22mm x 30mm Depth of Cut
M23S    23mm x 30mm Depth of Cut
M24S    24mm x 30mm Depth of Cut
M25S    25mm x 30mm Depth of Cut 
M26S    26mm x 30mm Depth of Cut
M27S    27mm x 30mm Depth of Cut
M28S    28mm x 30mm Depth of Cut
M29S    29mm x 30mm Depth of Cut
M30S    30mm x 30mm Depth of Cut
M31S    31mm x 30mm Depth of Cut
M32S    32mm x 30mm Depth of Cut
M33S    33mm x 30mm Depth of Cut
M34S    34mm x 30mm Depth of Cut
M35S    35mm x 30mm Depth of Cut
M36S    36mm x 30mm Depth of Cut
M37S    37mm x 30mm Depth of Cut
M38S    38mm x 30mm Depth of Cut
M39S    39mm x 30mm Depth of Cut
M40S    40mm x 30mm Depth of Cut
M41S    41mm x 30mm Depth of Cut
M42S    42mm x 30mm Depth of Cut
M43S    43mm x 30mm Depth of Cut
M44S    44mm x 30mm Depth of Cut
M45S    45mm x 30mm Depth of Cut
M46S    46mm x 30mm Depth of Cut
M47S    47mm x 30mm Depth of Cut
M48S    48mm x 30mm Depth of Cut
M49S    49mm x 30mm Depth of Cut
M50S    50mm x 30mm Depth of Cut
M51S    51mm x 30mm Depth of Cut
M52S    52mm x 30mm Depth of Cut
M53S    53mm x 30mm Depth of Cut
M54S    54mm x 30mm Depth of Cut
M55S    55mm x 30mm Depth of Cut
M56S    56mm x 30mm Depth of Cut
M57S    57mm x 30mm Depth of Cut
M58S    58mm x 30mm Depth of Cut
M59S    59mm x 30mm Depth of Cut
M60S    60mm x 30mm Depth of Cut

Unibor Long Length Cobalt Annular Cutter (50mm length, also referred to as "long series")


M12L    12mm x 50mm Depth of Cut
M13L    13mm x 50mm Depth of Cut
M14L    14mm x 50mm Depth of Cut
M15L    15mm x 50mm Depth of Cut
M16L    16mm x 50mm Depth of Cut
M17L    17mm x 50mm Depth of Cut
M18L    18mm x 50mm Depth of Cut
M19L    19mm x 50mm Depth of Cut
M20L    20mm x 50mm Depth of Cut
M21L    21mm x 50mm Depth of Cut
M22L    22mm x 50mm Depth of Cut
M23L    23mm x 50mm Depth of Cut
M24L    24mm x 50mm Depth of Cut
M25L    25mm x 50mm Depth of Cut
M26L    26mm x 50mm Depth of Cut 
M27L    27mm x 50mm Depth of Cut
M28L    28mm x 50mm Depth of Cut
M29L    29mm x 50mm Depth of Cut
M30L    30mm x 50mm Depth of Cut
M31L    31mm x 50mm Depth of Cut
M32L    32mm x 50mm Depth of Cut
M33L    33mm x 50mm Depth of Cut
M34L    34mm x 50mm Depth of Cut
M35L    35mm x 50mm Depth of Cut
M36L    36mm x 50mm Depth of Cut
M37L    37mm x 50mm Depth of Cut
M38L    38mm x 50mm Depth of Cut
M39L    39mm x 50mm Depth of Cut
M40L    40mm x 50mm Depth of Cut
M41L    41mm x 50mm Depth of Cut 
M42L    42mm x 50mm Depth of Cut
M43L    43mm x 50mm Depth of Cut
M44L    44mm x 50mm Depth of Cut
M45L    45mm x 50mm Depth of Cut
M46L    46mm x 50mm Depth of Cut
M47L    47mm x 50mm Depth of Cut
M48L    48mm x 50mm Depth of Cut
M49L    49mm x 50mm Depth of Cut
M50L    50mm x 50mm Depth of Cut
M51L    51mm x 50mm Depth of Cut
M52L    52mm x 50mm Depth of Cut
M53L    53mm x 50mm Depth of Cut
M54L    54mm x 50mm Depth of Cut
M55L    55mm x 50mm Depth of Cut
M56L    56mm x 50mm Depth of Cut
M57L    57mm x 50mm Depth of Cut
M58L    58mm x 50mm Depth of Cut
M59L    59mm x 50mm Depth of Cut
M60L    60mm x 50mm Depth of Cut


Unibor H32 Mag Drill
Unibor H32 Mag Drill